|
Post by themba on Jun 7, 2016 8:21:51 GMT
I've been using the new Cura 2.1 for a while now and I thought it would be nice to share my profile with anyone interested: Get it here: software.ultimaker.com/Cura_open_beta/rostock.json (2.94 KB) ^-This is the machine profile. Personally I often change the profile itself and run CuraEngine manually but it can be imported in cura by putting this file in /opt/cura/share/cura/resources/machines (or the equivalent location for your platform) rostock_mini_g2s.obj (44.73 KB) ^- you can even put this in /opt/cura/share/cura/resources/meshes to see a gray previous of the rostock machine. As far as I have discovered it is not yet possible to change the bed shape in Cura 2.1 rostock_mini_g2s.fcstd (98.32 KB) ^- source of the above Note that I use "infill_overlap": {"default": 0.25} (instead of 0.1, I believe it cura's default?) because it gives me slightly better wall adhesion. and "retraction_hop": {"default": 1.0} because more hop is better and the only reason it is usually kept low for cartesian printers (z axis slower than x and y axes) does not hold for deltaprinters.
|
|
uzi3l
New Member
Posts: 44
|
Post by uzi3l on Jun 11, 2016 8:14:52 GMT
am giving this a try, only thing is i put the sliced code on a sd card and my LCD says card inserted but the when i go to load the g-code it says no card. mite be that i have extended the sd card readers cable. will do a test later with the original see if that helps. so im sliced it in Cura 2 and printing in Repetier-host. thanks for sharing BTW
|
|
|
Post by aequitas on Jun 15, 2016 20:13:09 GMT
Tried this profile with latest community firmware installed. Works as expected. Slicing and printing with latest Cura beta.
|
|
uzi3l
New Member
Posts: 44
|
Post by uzi3l on Jun 30, 2016 9:56:32 GMT
Can i ask how you made these files?
|
|
|
Post by draglor on Oct 18, 2016 14:50:35 GMT
Anyone have a solution to import the JSOn data file into cura 2.3 beta ? they are no machines directory , i have try the 2 other containing the JSON file but never the geeetech printer was avaible into Cura preference printer
thank you by advance
|
|
|
Post by draglor on Nov 19, 2016 17:29:21 GMT
unfortunatly this file was incompatible with the new format of Cura 2.3, any update ?
|
|
|
Post by sarriaroman on Jan 27, 2017 4:07:22 GMT
A small contribution. attached is the definition for Cura 2.3.X. Attachments:cura.zip (4.99 KB)
|
|