zuzu
New Member
Posts: 4
|
Post by zuzu on Nov 11, 2016 6:27:29 GMT
is it possible to use any of these 2 heads in g2s ? i don't need 2 heads ,only 1 ,and one that can print more mats friend got some expensive printer with e3d head ,and samples of 8 kind filaments , some flex, some that glow in dark,some hard but not brittle like pla etc etc
thanks
|
|
|
Post by spikey1973 on Nov 11, 2016 17:01:55 GMT
hey..
i'm a newbee here. and i have a g2s pro for a while now and i wrecked a hotend.. so i decided to upgrade. i've manually build in 2 pcs of e3d clones. and am just starting with the recalibration.
although geeetech says it is not possible, i assumed this to be because it wouldn't physically fit but with some minor mods i got it to fit perfectly. the actual printing part is ofcourse a big difference. but since it is just a heater and a temp check. it seemd to me it should work (one could even fit the original parts into the e3d clone. this way the printer will never see the difference.
if i'm right... only time will tell.
as said, i'm just starting with recalibration and i'm really stuck (thats why i'm here now) on a very basic issue. so once i solve thet i will let you know how i will eveolve on the e3d.
can always pm me if you want more direct contact on the issue while i'm working on it.
kind regards Matthieu
|
|